236
097: Early Reflections

This early reflection effect has more precise early reflections

with twice the maximum length of a normal-size effect

(Fx:041). You can create a very smooth and dense sound.

098: L/C/R Long Delay

This multitap delay outputs three Tap signals to left, right and

center respectively. You can set a maximum of 2,730msec for

the delay time.

099: St/Cross Long Dly

(Stereo/Cross Long Delay)

This is a stereo delay, and can by used as a cross-feedback

delay effect in which the delay sounds cross over between left

and right by changing the feedback routing. You can set a

maximum of 1,360msec for the delay time.

aType Sharp, Loose, Modulated, Reverse
Selects the decay curve for the early reflection ☞ Fx:041
bER Time [msec]
Sets the time length of early reflection 10...1600msec
cPre Delay [msec] 0...200msec
Sets the time taken from the original sound to the first early reflection
dEQ Trim 0...100
Sets the input level of EQ applied to the effect sound
e
Pre LEQ Gain [dB]
Sets the gain of Low EQ –15.0...+15.0dB
Pre HEQ Gain [dB]
Sets the gain of High EQ –15.0...+15.0dB
f
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
a
L Delay Time [msec]
Sets the delay time of TapL 0...2730msec
Level
Sets the output level of TapL 0...50
b
C Delay Time [msec]
Sets the delay time of TapC 0...2730msec
Level
Sets the output level of TapC 0...50
c
R Delay Time [msec]
Sets the delay time of TapR 0...2730msec
Level
Sets the output level of TapR 0...50
d
Feedback (C Delay)
Sets the feedback amountof TapC –100...+100
Src Off...Tempo
Selects the modulation source of the TapC feedback amount
Amt –100...+100
Sets the modulation amount of the TapC feedback amount
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
Pre Delay
Early Reflections
LEQ HEQ
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High Damp Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
e
High Damp [%]
Sets the damping amount in the high range 0...100%
☞ Fx:043
Low Damp [%]
Sets the damping amount in the low range 0...100%
☞ Fx:043
f
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞ Fx:037
gSpread 0...50
Sets the width of the stereo image of the effect sound ☞ Fx:043
h
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
aStereo/Cross Stereo, Cross
Switches between stereo delay and cross-feedback delay
bL Delay Time [msec]
Sets the delay time for the left channel 0.0...1360.0msec
cR Delay Time [msec]
Sets the delay time for the right channel 0.0...1360.0msec
d
L Feedback
Sets the feedback amount for the left channel –100...+100
Src Off...Tempo
Selects the modulation source of feedback amount
Amt L –100...+100
Sets the modulation amount of the left channel feedback
e
R Feedback
Sets the feedback amount for the right channel –100...+100
Amt R –100...+100
Sets the modulation amount of the right channel feedback
fHigh Damp [%]
Sets the damping amount in the high range 0...100%
☞ Fx:043
gLow Damp [%]
Sets the damping amount in the low range 0...100%
☞ Fx:043
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞ Fx:037
iSpread –50...+50
Sets the width of the stereo image of the effect sound ☞ Fx:043
j
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Delay
Delay
Stereo/Cross
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High DampLow Damp
Spread
Stereo/Cross