Effect
215
a: BPM, b: L Delay Base Note, b: Times, c: C Delay Base Note,
c: Times, d: R Delay Base Note, d: Times

The delay time is the length of the note obtained by multiplying

the “Base Note” parameter by the Times value, in relation to the

tempo specified by the “BPM” parameter (or the MIDI Clock

tempo if “BPM” is set to MIDI).

a: Time Over? >

You can set the delay time up to 1365msec. If the delay time

exceeds this limit, the error message “OVER!!” appears in the dis-

play. Set the delay time parameters so that this message will not

appear. “Time Over?>” is only a display parameter.

050: St. BPM Delay (Stereo BPM Delay)

This stereo delay enables you to set the delay time to match

the song tempo.

a: Time Over? L >, a: R >

You can set the delay time up to 682msec. If the delay time

exceeds this limit, the error message “OVER!!” appears in the dis-

play. Set the delay time parameters so that this message will not

appear. "Time Over?>" is only a display parameter.

051: Sequence Delay

This four-tap delay enables you to select a tempo and rhythm

pattern to set up each tap.

f
High Damp [%]
Sets the damping amount in the high range 0...100%
☞ Fx:043
Low Damp [%]
Sets the damping amount in the low range 0...100%
☞ Fx:043
g
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞ Fx:037
hSpread 0...50
Sets the width of the stereo image of the effect sound ☞ Fx:043
i
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
a
BPM MIDI, 40...240
Selects MIDI Clock and assigns tempo ☞ Fx:049,
Time Over? L > ----, OVER!!
Display the error message if the left channel delay time exceeds the
upper limit ☞
R > ----, OVER!!
Display the error message if the right channel delay time exceeds the
upper limit ☞
b
L Delay Base Note                  
Selects the type of notes to specify the left channel delay time
☞ Fx:049,
Times x1...x16
Sets the number of notes to specify the left channel delay time
☞ Fx:049
Adjust [%]
Fine-adjust the left channel delay time –2.50...+2.50%
c
R Delay Base Note                  
Selects the type of notes to specify the right channel delay time
☞ Fx:049,
Times x1...x16
Sets the number of notes to specify the right channel delay time
☞ Fx:049
Adjust [%]
Fine-adjust the right channel delay time –2.50...+2.50%
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High DampLow Damp
High DampLow Damp
Tempo
BPM
BPM Base Note x Times
Base Note x Times
Adjust [%]
Adjust [%]
Delay
Delay
d
L Feedback
Sets the feedback amount for the left channel –100...+100
Src Off...Tempo
Selects the modulation source of feedback amount
Amt L –100...+100
Sets the modulation amount of the left channel feedback
e
R Feedback
Sets the feedback amount for the right channel –100...+100
Amt R –100...+100
Sets the modulation amount of the right channel feedback
fHigh Damp [%]
Sets the damping amount in the high range 0...100%
☞ Fx:043
gLow Damp [%]
Sets the damping amount in the low range 0...100%
☞ Fx:043
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞ Fx:037
i
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
aBPM
Selects MIDI Clock and assigns tempo MIDI, 44...240
☞,
bRhythm Pattern
Selects a rhythm pattern – – – ...    3
☞,
c
Tap1 Pan
Sets the panning of Tap1 L, 1...99, R
Tap2 Pan
Sets the panning of Tap2 L, 1...99, R
Tap3 Pan
Sets the panning of Tap3 L, 1...99, R
Tap4 Pan
Sets the panning of Tap4 L, 1...99, R
d
Feedback
Sets the feedback amount –100...+100
Src Off...Tempo
Selects the modulation source of feedback amount
Amt
Sets the modulation amount of the feedback –100...+100
Delay
Left
Right
Feedback
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High DampLow Damp
Input Level D-mod
+
Tempo BPM
BPM
Rythm Pattern
Pan