212
044: Stereo/Cross Delay

This is a stereo delay, and can by used as a cross-feedback

delay effect in which the delay sounds cross over between the

left and right by changing the feedback routing.

045: St. Multitap Delay

(Stereo Multitap Delay)

The left and right Multitap Delays have two taps respectively.

Changing the routing of feedback and tap output allows you

to create various patterns of complex effect sounds.

a: Mode
You can change how the left and right delay signals are panned by
modifying the routing of the left and right delay as shown in the
figure above. You need to input different sounds to each channel
in order for this parameter to be effective.
d: Tap1 Level
This parameter sets the output level of Tap1. Setting a different
level from Tap2 will add a unique touch to a monotonous delay
and feedback.
aStereo/Cross Stereo, Cross
Switches between stereo delay and cross-feedback delay
bL Delay Time [msec]
Sets the delay time for the left channel 0.0...680.0msec
cR Delay Time [msec]
Sets the delay time for the right channel 0.0...680.0msec
d
L Feedback
Sets the feedback amount for the left channel –100...+100
Src Off...Tempo
Selects the modulation source of feedback amount
Amt L –100...+100
Sets the modulation amount of the left channel feedback
e
R Feedback
Sets the feedback amount for the right channel –100...+100
Amt R –100...+100
Sets the modulation amount of the right channel feedback
fHigh Damp [%]
Sets the damping amount in the high range 0...100%
☞ Fx:043
gLow Damp [%]
Sets the damping amount in the low range 0...100%
☞ Fx:043
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞ Fx:037
iSpread –50...+50
Sets the width of the stereo image of the effect sound ☞ Fx:043
j
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Delay
Delay
Stereo/Cross
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp
Spread
Stereo/Cross
aMode Normal, Cross Feedback, Cross Pan1, Cross Pan2
Switches the left and right delay routing ☞
bTap1 Time [msec]
Sets the Tap1 delay time 0.0...680.0msec
cTap2 Time [msec]
Sets the Tap2 delay time 0.0...680.0msec
dTap1 Level
Sets the Tap1 output level 0...100
☞
e
Feedback (Tap2)
Sets the Tap2 feedback amount –100...+100
Src Off...Tempo
Selects the modulation source of the Tap2 feedback amount
Amt –100...+100
Sets the modulation amount of the Tap2 feedback amount
fHigh Damp [%]
Sets the damping amount in the high range 0...100%
☞ Fx:043
gLow Damp [%]
Sets the damping amount in the low range 0...100%
☞ Fx:043
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞ Fx:037
i
Spread –100...+100
Sets the width of the stereo image of the effect sound
☞ Fx:043,
Src Off...Tempo
Selects the modulation source of the effect sound’s stereo image
width
Amt –100...+100
Sets the modulation amount of the effect sound’s stereo image width
j
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High DampLow Damp
High DampLow Damp
Delay
Delay
Feedback
Tap1 Level Mode
Mode
(1) (2)
(1) (2)
Tap1=(1)
Tap2=(2)
Mode: Normal Mode: Cross Feedback Mode: Cross Pan1 Mode: Cross Pan2