KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Presentation Switcher / Controller
10
Table 2: Front Panel VP-23RC Presentation Switcher / Controller Features
# Feature Function
1 IR (Infrared) Receiver Signals from the Kramer remote control transmitter illuminate
the LED
2 POWER Switch Illuminated switch for turning the unit ON or OFF
3 IR IN Receiver Accepts IR remote commands for the IR learner feature
1
4 MEDIA / ROOM CONTROLLER
Buttons
Control the room and the A/V equipment (from 1 to 8)
2
5 s-VIDEO (Y/C)-AUDIO SELECTOR
Buttons Selects the s-Video-audio source (from 1 to 4)
2
6 VIDEO (CV)-AUDIO SELECTOR
Buttons Selects the composite video-audio source (from 1 to 4)
2
7 VGA/UXGA-AUDIO SELECTOR
Buttons Selects the VGA/UXGA video-audio source from (1 to 4)
2
8 CV Button Press to route the selected audio signal from the composite
video section to the master audio outputs
3
s-VIDEO Button Press to route the selected audio signal from the s-Video
section to the master audio outputs
3
VGA/UXGA Button
Press to route the selected audio signal from the
VGA/UXGA section to the master audio outputs
3
MASTER
AUDIO
SELECTOR
2
MIC Button Press to route the microphone input to the master audio
outputs
3
9 - Button Decrease the microphone audio signal level
10 MIC + Button
Increase the microphone audio signal level
11 + Button
Increase the master audio signal level
12
AUDIO LEVEL
MASTER
- Button Decrease the master audio signal level
13 LOCK Button Press to lock the front panel buttons
14 TALK OVER Button Push the button to activate talk over
4
1 Used by the system integrator only, see section 9.2
2 Each button when pressed can also execute a macro sequence of up to 15 programmed commands (as configured by the
system integrator)
3 MASTER OUT and SPKR OUT
4 With the TALK OVER button selected, speaking into the microphone amplifies the voice of the speaker, overriding and
fading out all other audio channels. However, pressing the MIC button in the Master Audio Selector re nders the Talk Over
function inactive