KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your VP-23RC
36
(I) When pressing button 2 under the VGA/UXGA-AUDIO SELECTOR, the
UXGA IN 2 signal is routed to the display
1
. The VGA/UXGA button under
the MASTER AUDIO SELECTOR section automatically illuminates, and the
UXGA audio signal is routed to the SPKR OUT
2
and the MASTER OUT
2
terminal block connectors simultaneously
3
.
(II) After connecting a microphone to the MIC IN XLR connector, the MIC
button under the MASTER AUDIO SELECTOR section illuminates and the
speakers output the MIC IN
4
audio signal, while retaining the UXGA display.
You can return to the UXGA audio output by pressing the VGA/UXGA
button under the MASTER AUDIO SELECTOR section once again.
Speaker
Display
Speaker
UXGA Source
Presenter’s
Microphone
I
I
II
II
Figure 21: Switching in the Master Audio Mode
1 The UXGA output is simultaneously routed to the UXGA CAT 5 OUT connector
2 The MASTER audio signal is routed simultaneously to the SPKR OUT and the MASTER OUT channels. The only
difference between them is that the SPKR OUT channel has an i nternal power amplifier, which lets you connect the speakers
directly to the unit
3 As well as to the AUDIO UXGA OUT terminal block connector, which is not connected in this example
4 Another way to use the microphone is t o press the TALK OVER button:
the main audio level is lowered when the
microphone picks up speech