Kramer Electronics VP-23RC - page 46

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Flash Memory Upgrade
42
A
VP23RC.hex
Figure 29: Atmel – Flip Window (Connected)
9. Click Run.
After each stage of the operation is completed, the check-box for that stage
becomes colored green
1
.
When the operation is completed, all 4 check-boxes will be colored green and
the status bar message: Memory Verify Pass appears
2
:
VP23RC.
hex
A

Figure 30: Atmel – Flip Window (Operation Completed)
10. Close the “Atmel – Flip” window.
11. Disconnect the power on the VP-23RC.
1 See also the blue progress indicator on the status bar
2 If an error message: “Not Finished” shows, click Run again