Krell Industries HTS 2 BackPanel Description, SeeFigure 2 on page13, 35 B-1Left and Right Inputs

BackPanel Description

SeeFigure 2 on page13

The back panel of the HomeTheater Standard provides all input and output connections, remote control inputs and outputs, poweron and off, and power connection. The back panel functions are described below.

Analog Audio Outputs and Inputs

32 Balanced Analog Audio Outputs

The HomeTheater Standard is equipped with six balanced analog audio channel outputs, with XLRconnectors,for the left, center, right, left rear, right rear, and subwoofer.

33 Single-ended Analog Audio Outputs

The HomeTheater Standard is equipped with six single-ended analog audio channel outputs, with RCAconnectors,for the left, center, right, left rear, right rear, and subwoofer.

34 Multi-Channel Audio Output Connector

The HomeTheater Standard is equippedwith a multi-channel audio output, with a DB- 25 connector,whichcontains the output connectionsfor all the output channels(left, center, right, left rear, right rear, andsubwoofer).

35 B-1 Left and Right Inputs

The HomeTheater Standard is equipped with one set of balanced inputs with connectors.

The XLRpin configurations are as follows: Pin 1: Shield (ground)

°)

Pin 2: Non-inverting (0

°

Pin) 3: Inverting (180

36 TapeIn Left andRight

The HomeTheater Standardis equippedwith one set of single-ended tape inputs with RCAconnectors.

37 Tape Out Left and Right

The HomeTheater Standard is equippedwith one set of single-ended tape outputs with RCAconnectors.

38 VCR1In Left and Right

The HomeTheater Standard is equippedwith one set of single-ended inputs with RCA connectors, for a VCRaudio source.

14 Krell HomeTheaterStandard