Krell Industries HTS 2 manual Remote Control, Power, CompositeVideo Inputs, ComponentVideo Outputs

48 CompositeVideo Inputs

TheHomeTheaterStandardis equippedwith four RCAcompositevideo inputs with RCAconnectors.

49 ComponentVideo Outputs

TheHomeTheaterStandardis equippedwith one set of componentvideo outputs with RCAconnectors.Componentvideo usesthree wires (labeled Y, Cr, and Cbon back panel) to conveythe videosignal, including the OSD.

50 ComponentVideo Inputs

TheHomeTheaterStandardis equippedwith two sets of componentvideo inputs.

Remote Control

51 RS-232Remoteor Optional PHASTLink Connector

TheHomeTheaterStandardis equippedwith an RS-232port, whichreceives messagesfroma computerbasedcontrol system,providing moreintelligent control of the HomeTheaterStandard. For moreinformation, see RS-232Port:Sending CommandsInterpreting Data, developer's reference shipped with the Home TheaterStandard.

TheHomeTheaterStandardmaybe outfitted with an optional PHASTLink connector instead of an RS-232connector,for integrating the HTSwithin a PHASTsystem. ContactyourauthorizedKrell dealer,distributor, or Krell for informationaboutthis connectionoption.

52 RC-5In

TheRC-5input makescustominstallation easy andsecureby accepting baseband RC-5input commandsfrom hardwiredremotecontrollers.

5312 VDCOut andIn

The12 VDCoutput sendsa 12 Volt poweron/off signal to other Krell componentsvia a 12V trigger cable, as well as to other devicesthat incorporate12 Volt poweron/off trigger input. TheHomeTheaterStandardhasfour programmable12 Volt outputs: Out1,Out2,Out3,andOut4;oneinput is available.

Note

Whenthe HTSis in the operational mode,the 12 VDCOutprovides12 V of DCoutput. Whenthe HTSis in the stand-bymodeor off, the DCoutput is 0 V.

Power

54 BackPanel PowerSwitch

Usethis switch to changethe HomeTheaterStandardfromoff to stand-by.

55 lEO Connector

TheHomeTheaterStandardis equippedwith a standardfemaleIEC powerconnector, for usewith the ACpowercord.

16 Krell HomeTheaterStandard