Operatingthe HomeTheater Standard, continued
Notes~
Thetape output functions only with analog sources.
Whenchangingsources, lower the volumeto off or mutethe output. This ensures that the next source played does not damageyour systemwith a high output transient.
MAIN ZONE AND ZONE 2 OPERATION
The HomeTheater Standard has two audio zones, main and zone 2. The main zone consists of the mainviewing or listening area, andzone2 consists of anotherlistening area. Youcan select a digital or analogaudio, or a video device for the mainzone. Zone 2 can only be usedwith an analogaudio device. To configure a device that has both digital and analog outputs, see Configure Devices, on page32.
The HomeTheater Standard's
¯Youcan play both zonessimultaneously, with the mainzoneplaying a device in one part of the houseandzone2 playing a different (or the same)device in another part of the house.
¯With the HomeTheater Standard in operational or
¯Youcan play a device using the mainzonewhile using zone2 to record.
The red LEDilluminates whenthe input is engagedand playing in the main zone. The green LEDilluminates whenthe input is engagedand playing in zone 2.
Play Both Zones
With the HomeTheater Standard in the
1.Press andrelease the HT$key (57) until the blue powerLEDilluminates,
2.Pressthe input device selection button or key for the device you wish to play,
3, Beginplaying the device,
4.Pressthe Z2 key (59).
5.Press the input device selection button or key for another device to play in
zone2. Or select the sameinput device button if you wantthe samedevice to play in both zones.
6, Beginplaying the device,
7, Press the HTSkey again to turn off zone2,
8, Press the Z2 key and the HTSkey again to turn off the mainzone.
54 | Krell HomeTheaterStandard |
