Connectingthe HomeTheater Standard to Your System, continued
NEXT: CONNECTVIDEO SOURCES
Note
SeeReadThis First, on page5, for information on makingthe
1.Connectthe output of your video componentsto the appropriate video input of the HomeTheater Standard.
2.Connectthe video outputs of the HomeTheater Standard to the inputs of video recordersor additional video monitors, if desired.
The componentvideo signal uses three wires that conveyluminance (Y), red minus luminance[R - Y] (Cr), andblue minusluminance[B - Y] (Cb) signals.
Use the componentconnection whenthe source device (DVD)and output device (TV) both feature componentconnections. See the user manualsincluded with these devices for moreinformation.
The HomeTheater Standardis also equippedwith four
The HomeTheater Standard is equipped with two
Note
LAST: CONNECTAMPLIFIER(S)
Connectthe outputs of the HomeTheater Standardto the input(s) of your power amplifier(s).
The HomeTheater Standard has balanced outputs with XLRconnectors and single- endedoutputs with RCAconnectors. Both outputs are active at all times, allowing simultaneousconnection to separate amplifiers. Only one of these output formats should be connectedto a single amplifier. Usethe
24 | Krell HomeTheaterStandard |