Krell Industries HTS 2 manual Configure FPD Display, Configure serial control

To changethe line numberon whichthe display appears,usethe 1" $ keys(80) to move to LINENUMBERWith.the blinking cursornext to LINENUMBER,pressenter (83), then use 1" $ keys(80) to select the screenline. Therangeis 0 (top line of screen)through (bottomline of screen).A doublearrowon the right side of the screenmovesup and down,indicating line position. Pressenter (83) to set the selection. SelectOKandpress enter (83) to return to the operationmenu.

Configure FPD Display

Thefront paneldisplay (FPD)feature allows youto adjust the FPDdisplay brightness. Select FPDDISPLAYCONFIGUREandpress enter (83). TheFPDDISPLAYCONFIGUREscreen

appears:

KRELL HTS

-FPD DISPLAY CONFIGURE-

H' BRIGHTNESS3 ~

OK

Pressenter (83), thenuse1" 4, keys(80) to select BRIGHTNESSTherange. is 0 (off) (brightest, the factory default). Pressenter(83) to set the selection.SelectOKandpress enter (83) to return to the operationmenu.

Configure serial control

This screenallows youto choosebetweenPHASTLinkand RS-232serial control sources. Select SERIALCONTROLCONFIGUREandpress enter (83). TheREMOTEFORMAT

screenappears:

KRELL HTS

-REMOTEFORMAT-

RS232

OK

Theflashing cursorappearsat RS232Press.enter (83), andthenuse1" 4, keys

(80)to select RS232or PHAST.Pressenter (83) to set the selection. SelectOKandpress enter (83) to return to the operationmenu.

For moreinformation, see RS-232Port: SendingCommandsInterpreting Data, developer'sreferenceshippedwith the HomeTheaterStandard.

46 Krell HomeTheater Standard