2. NON-SORT COPYING

1

Check that

NON-SORT, NON-STAPLE

is

 

displayed on the Basic menu.

 

 

c If

SORT

,

GROUP

 

or

STAPLE SORT

is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

displayed, press the key and select

NON-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SORT, NON-STAPLE

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Place the original(s) on the original feed tray or on the glass.

c See page 22 for how to set the original.

3 Key in the desired copy quantity.

c When 250 or less is copied at a time, all the copies will exit into the non-sort bin. When you use the optional automatic document feeder, the total number of copies (the number of originals X copy quantity) should be 250 or less.

c When more than 250 is copied at a time, the specified number of copies will exit into sort bins "1" up to "20", then the remaining copies will exit into the non-sort bin.

c If more than 850 (LT) or 750 (LD/LG/LT-R) is copied at a time, the copier automatically stops when 850 (or 750) copies have been completed, and the following message appears:

Remove paper from sorter bins ,

Remove all the copies from the sorter and press the START key again to continue.

Paper size

 

Sort bins

Non-sort bin

Total

 

 

 

 

 

Letter

1st~600th copy

601st~850th copy

850

copies

 

(30

copies/bin)

 

 

 

Ledger, Legal

1st~500th copy

501st~750th copy

750

copies

Letter-R

(25

copies/bin)

 

 

 

 

 

 

 

 

 

SORTER

OPTIONAL

USING THE

4

Select the desired copy size, reproduction

ratio, image density level, etc. if necessary.

5

Press the START key.

 

Note: When the sorter is working, do not touch

 

the bins.

123