9. TRIMMING/MASKING (Cont.)
Specifying an area
1 Place the original.
Specifying an area on the editing sheet
Open the transparent cover and place the original face up on the editing sheet with its bottom edge towards you. Slide the original as far as possible up to the left edge of the editing sheet, and align its top left with the arrow at the top left.
Specifying an area on the glass
Place the original face up on the glass with its bottom edge towards you and its top left aligned against the top left of the glass. Align the original with the original scale on the left.
Y2 | Y1 |
| |
|
|
| |
|
|
|
|
Y2 | Y1 |
| |
|
|
| |
|
|
|
|
X2
X1
| X2 |
X1 | Rear scale |
|
Original scale
84