13. IMAGE REPEAT (Cont.)

4

Followingthe“SpecifyinganArea”onpage

84, key in the values of the area to be

repeated (X1, X2, Y1 and Y2) with the

 

digital keys and press the lower

SET

key.

 

c If the entire original will be repeated:

 

X1 = 0 (mm)

Y1 = 0 (mm)

5

Place the original on the glass face down

with its bottom toward you and with its

top left aligned against the original scale

 

on the left side.

 

 

 

 

6

Set the repeat number.

c To change the repeat number:

Press the

2

or

8

 

key to select the desired

repeat number, and press the SET key.

Tip: If the repeat number is not set, the copier automatically repeats the original once. Only the length direction is available for repeat copying, and the original can be repeated up to 8 times.

7

Select the desired copy size, image density

level, copy quantity, etc. if necessary.

8 Press the START key.

Tips: If the setting of the paper size or the repeat number is not made appropriately, the image may not be copied completely.

92