Lanier 5722 6. REDUCTION AND ENLARGEMENT COPYING (Cont.), Selecting the Original Size and the Copy Size

If there are sheets of paper set on the sheet bypass, you must press the COPY- SIZE key corresponding to the sheets (see page 41) .

Tip:

See page 22 for how to set the originals.

c

tray or on the glass.

Place the original(s) on the original feed

4

5 Select the desired image density level and copy quantity.

6 Press the START key.

Press the ORIGINAL SIZE key of the same size as the original to be copied.

Press the desired COPY-SIZE key.

c The copier calculates the correct reproduction ratio based on the selected original size and copy size, and displays the reproduction ratio on the reproduction-ratio display.

c If the desired size of paper is not in any of the installed cassettes, the following message appears:

Set correct cassette

Install the correct-sized cassette or use the sheet bypass.

2

3

6. REDUCTION AND ENLARGEMENT COPYING (Cont.)Selecting the Original Size and the Copy Size

1 Press the ZOOM ORG. LT KEY.

34