Lanier 5722 1. CALIBRATION OF GRADATION (Cont.)

1. CALIBRATION OF GRADATION (Cont.)

9 When the message “Scanning and calibrating” disappears, press the TEST PRINT key to print out the second test chart.

10 Press the CALIBRATION key, then set the printed out chart on the glass in the same way as the first calibration.

11Press the START key to start the second calibration.

When the message “Scanning and

12calibrating”completed. goes out, all the operation is

Tip: If you want to return the image quality level to the default setting after the calibration, press the DEFAULT key in step 4.

96