5. COPYING IN THE AUTOMATIC PAPER SELECTION MODE

When the power switch is turned ON, the Automatic Paper Selection (APS) mode is selected as the default mode.

In this mode, if you place an original on the document feeder or on the glass, the copier automatically detects the size of the original, and selects paper of the same size as the original. This mode is available only for actual-size (100%) copying.

Procedure

1

2

Check that the Automatic Paper Selection mode is selected.

cIf APS is not indicated, press the ZOOM ORG.➞LT key and select APS .

Place the original(s) on the original feed tray or on the glass.

When Using the Reversing Automatic Document Feeder

cAfter aligning the edges of the originals, set

them face up on the original feed tray and align the slides to the edges of the originals.

cSee page 24 for the number of the originals you can set up at a time.

c When the START key is pressed, the sensor detects the size of the first original, and selects the paper size matched to the original.

Note: Remove any paper clips or staples from

the originals before placing them on theSlides original feed tray.

28