
Bypass copying is convenient when the size of any paper cassettes installed in the copier is not the size you require or when you want to use special sizes of paper such as Full Bleed (12"X18") or special types of paper such as thick paper and OHP films(transparency) or sticker labels.
cThis copier has bypass copy modes corresponding to paper types.
Refer to the table below and select the mode corresponding to the sheets. Otherwise, it may cause paper jams or lower the image quality.
cThe number of sheets that can be set at a time differs depending on paper type. Setting more than specified number of sheets at a time may cause copier failure or paper jams. Be sure to set within the specified range.
cThe range of acceptable paper sizes is from Full Bleed to
Bypass Copy Mode | Corresponding Paper Type | Maximum Capacity | |
|
|
| |
PLAIN | Plain paper | approx.50 sheets | |
|
| ||
Plain paper | approx.40 sheets | ||
| |||
|
|
| |
12"X18" | *Full Bleed | approx.30 sheets | |
|
|
| |
OHP FILM | OHP films | approx.20 sheets | |
|
|
| |
THICK 1 | Thick paper | approx.30 sheets | |
|
|
| |
THICK 2 | Thick paper | 1 sheet | |
|
|
| |
THICK 3 | Thick paper | 1 sheet | |
| |||
Thick sticker labels | |||
|
| ||
*Full Bleed = 12"X18" |
|
|
HOW TO MAKE COPIES
41