Press the TEST PRINT key to print out
5 the chart for calibration.
Press the CALIBRATION key after the
6 chart has been output.
When the display on the right appears, set
7 the chart face down on the glass and with its top left aligned against the original scale on the left side, in order that the black line comes to the left side.
8 Press the START key to start the first calibration.
c If the chart is not properly set, the following message appears:
Set chart correctly
Repeat the calibration in Step 6.
Notes:
cIf the glass is dirty or any foreign objects are stuck to the glass, calibration may not be operated properly. Keep the glass clean.
cInterrupt copying is not available during calibration.
USING THE SPECIAL FUNCTIONS
95