Lanier 5722 1. ADD PAPER SYMBOL, Adding Paper to the Front Cassette

1. ADD PAPER SYMBOL

When the paper supply in the selected cassette or the optional large-capacity feeder runs out, the cassette or large-capacity feeder symbol on the display panel flashes and this message appears:

Add paper

Add paper as described below.

Adding Paper to the Front Cassette

1

2

Pull out the cassette slowly until it comes to a stop.

Place the paper in the cassette.

cUp to 600 sheets of paper (22lb.) can be set.

cDo not add paper above the line on the back guide.

cDo not use creased, folded, wrinkled or damp sheets of paper.

Note: Check that there is a slight gap (about 0.5

mm)left between the paper and each of the side guides as shown; the total gap should not exceed 1 mm. If the gap is not suitable, paper misfeeding may possibly occur.

Limit line

Side guide Side guide

0.5mm 0.5mm

130