Enter the number of the originals.
3 | c | Use the | digital keys to enter the number | |||||
|
| of your | originals or press the | Original | ||||
|
|
|
|
|
|
|
| |
|
|
| Count | key. | ||||
|
|
|
|
|
| |||
|
|
|
|
| ||||
| c | When you press the | Original Count | key, | ||||
the copier starts counting the originals automatically. When it finishes counting them, this message appears:
Put originals in doc. feeder
Thenresettheoriginalsintheoriginalfeedtray in the same way as described in step 1.
Tip:To have copies arranged in the correct page order in 2 in 1 copying, it is necessary to let the copier know the number of originals in one of the following ways:
cWhen making the copier count the number of originals:
→Press the Original Count key.
cWhen the operator knows the number of originals:
→Key in the number of the originals.
4 Press the SET key.
5
6 Press the START key.
Note: For automatic stapling in the 2 in 1 mode, the stapling position is the right bottom corner rather than the normal left upper corner of the copy, as shown on the right. If you want to staple on the left upper corner, change the direction and use the manual stapling mode (see page 127).
Normal stapling position
Stapling position in 2 in 1 (right bottom corner)
72