5 Press the START key.
Using the automatic document feeder:
cThe originals placed on the original feed tray will automatically be fed in one by one.
cIf the sort/stapling mode is selected, all the sets of copies will automatically be stapled after copying is finished.
cIf the copier stops during the sort or sort/ stapling mode and displays
Remove paper from sorter bins ,
remove all the copies from the sorter and press the START key again to continue. In this case, stapling is not possible.
Placing the original on the glass:
cAfter the copying of the first original (last page) finishes, place the next original and press the START key.
cRepeat this step until all the originals finish being copied.
6 | Pressing the STAPLE | key will cause |
the copies in each bin to be stapled | ||
automatically. |
| |
c While stapling is in progress, if you press the
STAPLE 
key again, stapling will stop. Pressing the key again will resume stapling.
c The STAPLE 
key lamp comes on only when stapling is possible. However, if the maximum number of copies that can be
stapled is exceeded, the STAPLE 
key lamp goes out, alerting the operator that stapling is not possible.
Note: Do not open the stapler cover during stapling in order to avoid a staple jam.
126