cThe sensor unit immediately detects the size of the original, selects the paper size matched totheoriginal,andcalculatesthereproduction ratio based on the detected original size and the selected copy size. The reproduction ratio is then displayed.

cIf the following message appears:

Change direction of original, change the direction of the original on the glass.

cIf the following message appears:

Use reduction cassette

,

install the correct-sized cassette, and start the

procedure all over again.

 

5

Select the desired image density level and

copy quantity.

6

Press the START key.

 

c Reduced or enlarged copies of the selected

size will exit.

Tips:

Thecopiermaynotbeabletodetectthefollowing types of original in the AMS mode:

cTransparent originals such as OHP film

cEntirely blackish originals or originals with blackish edges

Refer to “Selecting the Original Size and the Copy Size” on page 34 to make copies of such originals.

HOW TO MAKE COPIES

33