Lanier GX5050 manual Host Interface Menu, You can specify the Dhcp On Off Default On

Making Printer Settings

7.Press the [Online] key. The initial screen appears.

Host Interface Menu

In the Host Interface menu, you can make network settings and settings for the computer to printer USB connec- tion (if used). Settings made using the Host Interface menu remain effective even if you turn the printer off.

I/O Timeout

Specify how long the printer waits for the currently-connected interface to respond. When the specified time elapses, the printer can receive data from another interface.

If you make the [I/O Timeout] period too short, timeout might occur while data transfer is in progress. If this happens, the print job will be interrupted by a new job from another interface.

z

z

z

z

z

10seconds

15seconds

20seconds

25seconds

60seconds

Default: 15 seconds

Network Setup

You can make network-related settings.

DHCP

You can specify the DHCP.

z

z

On Off

Default: On

IP Address

You can specify the IP address.

When DHCP is set to on, the IP address cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration. Default: 0.0.0.0

Subnet Mask

You can specify the subnet mask.

When DHCP is set to on, the subnet mask cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration.

Default: 0.0.0.0

Gateway Address

You can specify the gateway address.

When DHCP is set to on, the gateway address cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration.

Default: 0.0.0.0

72