Lanier GX5050 manual Using as a Remote Printer NetWare 5.1, NetWare

Using a Printer Server

11.Select the [Define additional properties] check box, and then click [Create].

12.Assign a print queue to the created printer. Click [Assignments], and then click [Add...] in the [Print queues] area.

13.In the [Available objects] box, click the previously created queue to be highlighted, and then click [OK].

14.Click [Configuration], select [Parallel] from the [Printer type] box drop-down menu, and then click [Communication].

15.Click [Manual load] in the [Connection type] area, and then click [OK].

16.Check the setting, and then click [OK].

17.Create a print server. Select section or organization object, and then click [Create…] on the [Object] menu.

18.In the [Class of new object] ox, click [Print Server] to be highlighted, and then click [OK].

19.In the [Print Server name] box, enter the print server name.

20.Select the [Define additional properties] check box, and then click [Create].

21.Assign a printer to the created print server. Click [Assignments], and then click [Add...] in the [Printers] area.

22.In the [Available objects] box, click the previously created printer to be highlighted, and then click [OK].

23.Check the setting, and then click [OK].

24.Start the print server by entering the following from the console of the NetWare server.

If the print server is in operation, quit and then restart it.

zTo exit

CAREE: unload pserver.

zTo start

CAREE: load pserver .

If you cannot identify the printer you want to configure from the displayed printer name, check the printer name against a "system summary" page printed from the printer to find required printer.

Using as a Remote Printer (NetWare 5.1, NetWare 6.5)

Follow the procedure below to connect the printer as a remote printer in NetWare 5.1/6.5.

z

z

To use as a remote printer in a NetWare 5.1/6.5 environment, use in NDS mode. This printer is not available as a remote printer for use in a pure IP environment

Setting up the Network Interface Board.

1.Launch the Web browser.

2.In the address bar, enter "http://(printer's IP address or host name)/". Web browser top page is displayed.

If SSL encryption has been enabled, enter "https://(printer's address or host name)/".

247