Lanier GX5050 manual Paper Is Not Fed or Delivered Normally

Troubleshooting

Paper Is Not Fed or Delivered Normally

If the printer is operating but paper will not feed or paper jams multiple times, check the condition of the printer and paper.

Paper does not feed smoothly.

Paper guides are not adjusted properly.

zThe paper guides of the paper tray do not match the paper loaded. Adjust the paper guides and load the paper again. See p.34 "Loading Paper".

Paper is not loaded properly.

zThe paper is not loaded properly. Load the paper correctly. See p.34 "Loading Paper".

Paper is curled.

zRemove the loaded paper and check if it is curled. If it is, straighten the curl.

Paper that is not compatible is loaded.

zRemove the loaded paper and replace it with compatible paper. See p.32 "Non-compatible Paper".

Paper jams multiple times.

The guide board is not closed.

zMake sure that the guide board is closed. Remove the duplex unit and press both sides of the guide board until it clicks closed.

Printing densely coloured images on both sides.

zWhen printing images containing areas of solid colour that consume a lot of ink, we recommend single- sided printing.

Multiple sheets of paper are fed at one time.

Load the paper again. Remove the paper from the paper tray, fan it well, and tap it on a flat surface such as a desk to even the edges. Check the position of the paper guides of the paper tray, and then load the paper again.

Though a paper jam is cleared, paper does not feed.

When a paper jam occurs, clear the paper jam, and then press the [Resume] key. See p.92 "Paper Jam".

zIf an error is displayed on the Status monitor, follow the instructions to solve the problem. p.112 "Status Monitor Errors".

91