Lanier GX5050 manual Click PCL/RPCS Raster Printer Drivers, 153

Preparing for Printing

Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.

3.Click [PCL/RPCS Raster Printer Drivers].

4.The software license agreement appears in the [<License Agreement>] dialog box. After reading the agreement, click [I accept the agreement.], and then click [Next >].

5.Click [Next >].

6.Click [Connected via LAN].

7.Select the printer model you want to use.

The printer name can be changed in the [Change settings for 'Printer Name'] box.

8.Double-click the printer name to display the printer settings.

The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port.

9.Click [Port:], and then click [Add].

10.Click [SmartDeviceMonitor], and then click [OK].

11.Click [IPP].

12.In the [Printer URL] box, enter "http://printer's address/ipp" as the printer's address.

When setting SSL, a protocol for encrypted communication, under environment which server authentifica- tion is issued, enter "https://(printer's address)/ipp". Internet Explorer must be installed on your computer. Use the highest version. Internet Explorer 6.0 or higher is recommended.

13.Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing port.

If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.

14.Click [Detailed Settings] to make necessary settings.

For information about the settings, see SmartDeviceMonitor for Client Help.

15.Check that the port of the selected printer is displayed in [Port:].

16.Select the [Default Printer] check box to configure the printer as default.

17.Click [Continue]. Installation starts.

18.Select whether or not to open the Status monitor automatically.

19.Click [Next >].

20.Click [Finish] in the installation completion dialog box.

A message about restarting the computer may appear. Restart the computer to complete installation. To stop installation of the selected software, click [Cancel] before installation is complete.

zA message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See p.164 "If a Message Appears during Installation".

153