5: Menu-Driven Console Management
2.Move to highlight SNMP and press <Enter>. Decide to have it Disabled or Enabled.
3.Move to highlight Get Community Name and press <Enter>. Enter text and press <Enter>.
4.Move to highlight Set Community Name and press <Enter>.Enter text and press <Enter>.
5.Move to highlight Trap Community Name 1 and press <Enter>. Enter text and press <Enter>. Repeat to specify up to four more trap community names.
6.Move to highlight Trap Host 1 IP Address and press <Enter>. Type an IP address for trap host 1 and press <Enter>. Repeat to specify up to four more trap host IP addresses
7.Move to highlight Cold Start Trap and press <Enter>. Decide to have it Disabled or Enabled.
8.Move to highlight Warm Start Trap and press <Enter>. Decide to have it Disabled or Enabled.
9.Move to highlight Link Down Trap and press <Enter>. Decide to have it Disabled or Enabled.
10.Move to highlight Link Up Trap and press <Enter>. Decide to have it Disabled or Enabled.
11.Move to highlight Authentication Failure Trap and press <Enter>. Decide to have it Disabled or Enabled.
12.Move to highlight Rising Alarm Trap and press <Enter>. Decide to have it Disabled or Enabled.
13.Move to highlight Falling Alarm Trap and press <Enter>. Decide to have it Disabled or Enabled.
14.Move to highlight Topology Change Trap and press <Enter>. Decide to have it Disabled or Enabled.
56 |
