Solution:
–Use Category 5 wiring and ensure that the network cable is securely connected.
–Connect to a 1000
•Problem: The Wake On LAN feature is not working. Solution:
–Ensure that Wake On LAN is enabled in ThinkPad Setup.
–If it has been enabled, check with your LAN administrator for the necessary settings.
•Problem: If your computer is a Gigabit Ethernet model, it cannot connect to the network at 1000 Mbps. Instead, it connects at 100 Mbps.
Solution:
–Try another cable.
–Ensure that the link partner is set to
–Ensure that the switch is
A wireless LAN problem
Problem: You cannot connect to the network using the
Solution:
•If your system is installed with Windows 7 operating system, ensure that:
–Your wireless LAN driver is the latest version. Check the Web site and confirm that the driver version supported by the Access Connections program is the latest documented in the readme file.
–Your computer is within range of a wireless access point.
–The wireless radio is enabled by
Check the Network Name (SSID) and your encryption information. Use the Access Connections program to verify this
•If your system is installed with Windows 8 operating system, ensure that:
–Your wireless LAN driver is the latest version.
–Your computer is within range of a wireless access point.
–The wireless radio is enabled.
–The Airplane mode is off.
Bluetooth problems
•Problem: Sound does not come from the Bluetooth headset/headphone but comes from the local speaker even though the Bluetooth headset/headphone is connected using a Headset profile or AV profile.
Solution: Do the following:
1.Exit the application that uses the sound device (for example, Windows Media Player).
2.Open Control Panel. Click Hardware and Sound ➙ Sound ➙ Playback.
3.If you are using a Headset profile, select Bluetooth
4.Click OK to close the Sound window.