Removing a simple-swap hard disk drive
This procedure applies only to server models that have
Attention:
To remove a
1.Read the safety information that begins on page vii and “Installation guidelines” on page 29.
2.Turn off the server and all attached devices; then, disconnect all power cords and external cables.
3.Remove the lower bezel (see “Removing the
4.Pull the loops of the drive assembly that is to be removed toward each other; then, pull the assembly out of the bay.
5.If you are instructed to return the drive assembly, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
