9.Pull out on the hard disk drive fan assembly release tabs; then, rotate the assembly away from the drive cage slightly.
1 Release tabs
2 Hard disk drive fan assembly
3 Slot
10.Remove the cable from the slot on the hard disk drive fan assembly; then, rotate the assembly away from the drive cage and remove the assembly from the drive cage.
11.If you are instructed to return the hard disk drive fan assembly, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Installing the hard disk drive fan assembly
This procedure applies only to server models that have a hard disk drive fan assembly.
Attention:
vReplace a failed fan within 48 hours.
vTo ensure proper cooling and airflow, do not operate the server for more than 30 minutes with the side cover removed.
To install the hard disk drive fan assembly, complete the following steps:
1.Insert the hard disk drive fan assembly retaining tab over the right edge of the hard disk drive backplane; then, rotate the fan assembly toward the backplane. Do not fully close the hard disk drive fan assembly.
76ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide
