9.Take the other end of the signal cable that is attached to the drive backplane section for drive bays 0 through 3 (as labeled on the front of the drive cage) and connect it to the connector that is closest to the battery on the PCI card.

10.Replace the hard disk drive fan assembly:

a.Insert the hard disk drive fan assembly retaining tab over the right edge of the hard disk drive backplane; then, rotate the hard disk drive fan assembly toward the backplane. Do not fully close the hard disk drive fan assembly.

b.Route the signal cables and power cable through the slot on the edge of the hard disk drive fan assembly. Make sure that the cables will not be pinched between the hard disk drive fan assembly and the hard disk drive backplane when the assembly is installed.

c.Rotate the hard disk drive fan assembly toward the backplane until the release tabs are fully engaged and snap into place.

11.Reconnect the hard disk drive fan assembly cable to the system board.

12.Rotate the drive cage back into the server until it stops; then, press and hold the retaining tab on top of the drive cage while you rotate the drive cage into the chassis until it is in the closed position.

13.Reinstall the hard disk drives.

Note: Before you continue, check all internal power cables to make sure that they are connected to the system board and other optional devices.

14.Replace the side cover (see “Installing the side cover” on page 33). Go to “Completing the installation” on page 67.

15.Lock the side cover.

16.Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server.

Removing a USB embedded hypervisor flash device

To remove the virtual media key, complete the following steps:

1.Read the safety information that begins on page vii and “Installation guidelines” on page 29.

2.Turn off the server and peripheral devices and disconnect all power cords.

3.Unlock and remove the side cover (see “Removing the side cover” on page 32).

4.Unlock the USB retaining latch by squeezing the two retaining clips toward each other. Then, lift up the bracket cover.

5.Grasp the flash device and pull to remove it from the connector.

6.Press down on the retaining latch to return it to the original position.

7.If you are instructed to return the flash device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Installing a USB embedded hypervisor flash device

To install the virtual media key, complete the following steps:

1.Read the safety information that begins on page vii and “Installation guidelines” on page 29.

2.Turn off the server and all attached devices; then, disconnect all power cords.

3.Unlock and remove the side cover (see “Removing the side cover” on page 32).

4.Unlock the USB retaining latch by squeezing the two retaining clips toward each other.

Chapter 5. Installing and replacing optional devices 61

Page 76 Page 78
Page 77
Image 77
Lenovo 6526, 6523, 6524 Removing a USB embedded hypervisor flash device, Installing a USB embedded hypervisor flash device
Page 76 Page 78

6529, 6526, 6522, 6523, 6528 specifications

The Lenovo series, including the 6524, 6530, 6525, 6528, and 6523, represents a formidable lineup of devices aimed at meeting the diverse needs of both business and personal users. Each model brings unique features and technologies to the table, contributing to a seamless user experience.

The Lenovo 6524 is known for its robust performance, equipped with the latest generation Intel processors. Its enhanced thermal design ensures efficient cooling, allowing users to engage in demanding tasks without experiencing overheating issues. With a high-resolution display, the 6524 offers vibrant visuals and excellent color accuracy, making it ideal for content creators and media consumption alike. Additional features include a long-lasting battery and rapid charging capability, providing users with the freedom to work on-the-go.

Moving on to the Lenovo 6530, this model excels in connectivity. With multiple USB ports, HDMI output, and an advanced Wi-Fi system, it ensures users stay connected at all times. Its integrated security features, including a fingerprint reader and enhanced encryption, make it a favorite among business professionals who prioritize data security. The sleek design paired with its lightweight frame allows easy transport, making it a great companion for those who travel frequently.

The Lenovo 6525 focuses on multimedia capabilities. This model comes with enhanced audio technology, providing an immersive sound experience for music and movies. Its graphics performance is bolstered by dedicated GPU options, making it suitable for light gaming and graphic design tasks. The 6525 also offers ample storage options, allowing users to store large files without compromising performance.

The Lenovo 6528, known for its versatility, offers a 2-in-1 design. Users can easily switch between laptop and tablet modes, making it perfect for both work and entertainment. This model features a touch screen with stylus support, allowing for intuitive interaction and creativity. Its durable design ensures it can withstand everyday use while maintaining a professional appearance.

Lastly, the Lenovo 6523 is a budget-friendly option that doesn't compromise on quality. It offers essential features for everyday tasks, such as browsing, document editing, and video streaming. Its compact design makes it suitable for students and casual users, while its energy-efficient components ensure longer battery life.

Collectively, these Lenovo models showcase a range of technologies and characteristics tailored to different user needs, from high-performance tasks to budget-conscious options, highlighting Lenovo's commitment to innovation and quality.
Top Page Image Contents