4413-XXX

Carrier assembly with belt removal

1.Remove the top cover assembly. See “Top cover assembly removal” on page 4-5.

2.Remove print engine. See “Print engine removal” on page 4-16.

3.Depress the belt tensioner (A) until tension is released.

4.Remove the belt (B) from the carrier motor.

5.Remove two carrier shaft retainer springs (C) that secure the shaft.

6.Disconnect carrier cables from the system board.

7.Remove the carrier shaft.

8.Remove the carrier assembly.

Note: Position of encoder strip.

4-18Service Manual

Page 56
Image 56
Lexmark 4200 Series manual Carrier assembly with belt removal, Remove print engine. See Print engine removal on