4413-XXX
| FRU / Function | Action | |
|
|
| |
6 | Paper Feed | Ink smudging and smearing can be caused by | |
|
| paper problems or problems in the paper feed | |
|
| area. | |
|
| Check the following: | |
|
| • Correct type of paper is being used. Also check | |
|
|
| the paper for curl or wrinkles. |
|
| • | Feed rollers for wear, dirt, or looseness. |
|
| • Gears for wear or binds. | |
|
| • | Paper path for obstructions. |
|
|
| |
7 | Carrier Transport | Blurred print and voids can be caused by problems | |
|
| in the carrier transport area. Check the following: | |
|
| • | Carrier transport belt for wear. |
|
| • | Carrier guide rod for wear or dirt. If dirty, clean |
|
|
| and lubricate. |
|
| • Carrier to carrier frame engagement should be | |
|
|
| lubricated with grease P/N 99A0394. |
|
| • | Idler pulley parts for wear, damage, or |
|
|
| looseness. |
|
|
| |
8 | Alignment | Uneven vertical lines can be adjusted by | |
|
| performing the printhead alignment adjustments in | |
|
| the maintenance mode. The user is directed, to | |
|
| perform the printhead alignment adjustments, | |
|
| when replacing a printhead cartridge. | |
|
|
|
|
