Troubleshooting | 50 |
Wireless network troubleshooting
If you are having trouble setting up your printer on a network, print a network setup page, and then see the User's Guide available on the installation software CD.
Also, make sure to check the network indicator lights to verify the connection status of the printer. For more information on the location of the network indicator lights, see“Using the printer control panel” on page 13.
Wireless troubleshooting checklist
Before beginning to troubleshoot the wireless printer, verify the following:
•The printer, the computer, and the access point (wireless router) are all plugged in and turned on.
•The wireless network is working properly.
Try accessing other computers on your wireless network.
If your network has Internet access, then try connecting to the Internet over a wireless connection.
•Your SSID is correct.
Print a network setup page to verify the SSID the printer is using.
If you are not sure if your SSID is correct, then run the wireless setup again.
•Your WEP key or WPA passphrase is correct (if your network is secure). Log on to the access point and check the security settings.
A security key is like a password. All devices on the same wireless network using WEP, WPA, or WPA2 share the same security key.
If you are not sure if your security information is correct, then run the wireless setup again.
•The printer and the computer are within the range of the wireless network.
For most networks, the printer and the computer should be within 100 feet (30 meters) of the access point (wireless router).
•The Wi‑Fi indicator is green and successfully connected.
•The printer driver is installed on the computer from which you are performing a task.
•The correct printer port is selected.
•The computer and printer are both connected to the same wireless network.
•The printer is located away from obstacles or electronic devices that could interfere with the wireless signal.
Make sure the printer and access point are not separated by poles, walls, or support columns containing metal or concrete.
Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security system cameras, other wireless networks, and some Bluetooth devices.
Printing a network setup page
A network setup page lists the configuration settings of the printer, including the IP address and MAC address of the printer.
1Load plain paper.
2From the printer control panel, navigate to:
> Setup > 
> Network Setup > 
> Print Network Setup Page > 
Locating IP addresses
For Windows users
1Open the command window.
In Windows 8
From the Search charm, type run, and then navigate to: Apps list > Run > type cmd > OK
In Windows 7 or earlier
aClick 
, or click Start and then click Run.
bIn the Start Search or Run dialog, type cmd.
cPress Enter, or click OK.
2Type ipconfig, and then select Go or Enter.
The IP address appears as four sets of numbers separated by periods, such as 123.23.123.123.
For Macintosh users
1From the Apple menu, navigate to: About This Mac > More Info
2From the Contents pane, choose Network.
3If you are connected over a wireless network, then choose AirPort from the Active Services list.
Locating the printer IP address
•You can locate the printer IP address by viewing the printer network setup page. See the User's Guide on the software installation CD for more information on printing a network setup page.
