LG Electronics 29460 manual Line 2 jack

Each Line on a Separate Modular Jack

1.Plug one end of the handset cord into the handset and the other end into the jack on the side of the base. Place the handset in the base.

2.Plug the power supply cord into the POWER 6V DC jack on the base and into an AC outlet.

3.Plug the telephone line cord into the jack marked LINE 1+2 on the back of the unit and into a single line modular jack you want to be line 1 .

4.Plug the other telephone line cord into the jack marked LINE 2 on the back of the unit and into the single line modular jack you want to be line 2.

NOTE : The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see “Tone/ Pulse Dialing.” If you don’t know which type of service you have, check with the phone company.

3 1

4

2

2	1
	POWER
	6V AC
DATA PORT
DATA PORT	LINE 1+2 LINE 2

LINE 1+2 jack LINE 2 jack

CAUTION: Use only the ATLINKS USA 5-2495 power supply that is compatible with this unit. Using other power supplies may damage the unit.

12