Product Description
1.0PRODUCT DESCRIPTION
The Liebert GXT3 is a compact, online uninterruptible power system (UPS) that continuously conditions and regulates its output voltage. The Liebert GXT3 is designed to supply microcomputers and other sensitive electronic equipment with clean sine wave input power, 700VA to 3000VA at 230V.
Upon generation, AC power is clean and stable. However, during transmission and distribution it is subject to voltage sags, spikes and complete failure that may interrupt computer operations, cause data loss and damage equipment.
The Liebert GXT3 protects equipment from these disturbances. The Liebert GXT3 continuously charges its batteries from the mains, enabling it to supply power to connected loads, even when the mains fail.
This section describes the UPS, its features, models, appearance and components, operating principles and operating mode.
1.1Features
The UPS includes the following features:
•Intelligent battery management to extend the battery life
•Operation and display panel with LED for monitoring load percentage and battery capacity independently
•Flexible network management with Liebert MultiLink® software
•Fan fault
•Intelligent fan operation, automatically changing rotation speed depending on system requirements, to decrease power consumption and noise
•Input circuit breaker to ease recovery from overloads
•CE mark and safety approval from CE
•Communication options: USB port, Liebert IntelliSlot® port and terminal block communication
•Dry contacts for remote monitoring
•Input power factor greater than 0.99
•Output voltage selection function
1.2Available Models
Available models of the UPS are shown in Table 1:
Table 1 | UPS models, power ratings | |
|
| |
Model | Nominal Power Rating | |
|
| |
700VA/630W | ||
|
| |
1000VA/900W | ||
|
| |
1500VA/1350W | ||
|
| |
2000VA/1800W | ||
|
| |
3000VA/2700W | ||
|
|
|
Liebert® GXT3™ | 4 |
