Installation
Figure 8 Rotate the operation and display panel
Operation and Display Panel
Rotated Clockwise 90 Degrees
c.Pull the logo on the front plastic bezel cover, rotate it 90 degrees clockwise and snap it back into position. The rotated front plastic bezel cover is shown in Figure 9.
d.Replace the front plastic bezel cover on the Liebert GXT3. At this point, the UPS operation and display panel and logo have been rotated 90 degrees clockwise, which provides upright viewing for users.
5.Place the Liebert GXT3 and any battery cabinets on the support bases. Each Liebert GXT3 needs four support bases, as shown in Figure 9.
Figure 9 Tower installation
| Liebert GXT3 UPS and |
Liebert GXT3 UPS | External Battery Cabinet |
Operation and
Display Panel
Rotated for
Tower Operation
Support Bases | Support Bases |
11 | Liebert® GXT3™ |
