Liebert RAC2-8 - page 20

Section 3: Operation
The Override function lets you manually force a unit ON or OFF, or to
restore a forced unit to the normal control of the RAC2-8 system. The
Override function acts immediately, ignoring the Hold Delay. An
override message with time stamp is entered in the Alarm memory
buffer. The Alarm light remains on while any unit is in an Override
mode.
To override a unit, enter the two digit label assigned to the unit, then
press Enter:
UNIT 01 FORCED ON
2. FORCE OFF
3. RESTORE
4. RETURN
Select the desired override option.
When finished, press 4 to return to the Main Menu.
Liebert RAC2-8 • 15