STEP 20:

FIGURE 20
21

STEP 21:

FIGURE 21
• Pull back on the SPRING PIN and slide the MULTI PRESS SEAT ADJUST (6) over the MULTI PRESS SLIDE TUBE (24) as shown
in FIGURE 20.
• SECURELY assemble the MULTI PRESS SLIDE TUBE (24) to the MULTI PRESS FRAME (8) using seven RH CAPS (69), two
3/8 X 67mm BOLTS (55), one 3/8 X 61mm BOLT (54), one 3/8 X 25mm BOL T (49), seven 3/8” SAE W ASHERS (66), seven 3/8” RH
WASHERS (67) and three 3/8” LOW HEIGHT LOCK NUTS (65) as shown in FIGURE 21.
6
24
8
SPRING PIN
• Slide the end of the MULTI PRESS SLIDE TUBE (24) over the MULTI PRESS FRAME (8) as shown in FIGURE 20.
67
66
69
55 3/8 X 67mm
24
65
54 3/8 X 61mm
8
3/8 X 25mm 49
01
1/2 1/2 1/2 1/2 1/2 1/2
23456
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150