27
STEP 30:
FIGURE 30• Route the MULTI PRESS CABLE (73) through the bracket on the MULTI PRESS FRAME (8) and assemble one 4-1/2” PULLEY
(26) to the FRAME (8) using four RH CAPS (69), two 3/8 X 43mm BOLTS (51), four 3/8” SAE WASHERS (66), four 3/8” RH WASH-
ERS (67) and two 3/8” LOW HEIGHT LOCK NUTS (65) as shown in FIGURE 30.
• Route the MULTI PRESS CABLE (73) under the bracket on the MULTI PRESS FRAME (8) and assemble one 4-1/2” PULLEY
(26) to the FRAME (8) using one BLACK RH CAP (68), one RH CAP (69), one 3/8 X 43mm BOLT (51), two 3/8” SAE W ASHERS
(66), two 3/8” RH WASHERS (67), one 3-1/2 X 1” CABLE CLIP (29) and one 3/8” LOW HEIGHT LOCK NUT (65) as shown in FIG-
URE 30.
51 3/8 X 43mm
3/8 X 43mm 51
67
8
68 BLACK
65
29
66
73
26
26
69
69
01
1/2 1/2 1/2 1/2 1/2 1/2
23456
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150