FIGURE 16
17

STEP 16:

• Route the LAT CABLE (71) through the LAT/LOW BOOM (11) and assemble two 4-1/2” PULLEYS (26) to the BOOM (11) us-
ing two BLACK RH CAPS (68), two RH CAPS (69), two 3/8 X 70mm BOLTS (56), four 3/8” SAE WASHERS (66), four 3/8” RH
WASHERS (67), two 2-7/8 X 2-1/4” CABLE CLIPS (28), four 3/8 X 1/2” FLANGE SPACERS (46) and two 3/8” LOW HEIGHT LOCK
NUTS (65) as shown in FIGURE 16.
66
65
69
56 3/8 X 70mm
38
36
71
28
26
46
67
• Slide one WEIGHT STACK PIN (38) over the stem on the HEAD PLATE (36) as shown in FIGURE 16.
• Screw the threaded end of the LAT CABLE (71) all the way onto the end of the stem on the HEAD PLATE (36) and tighten jam
nut securely. See FIGURE 16.
68 BLACK
11
01
1/2 1/2 1/2 1/2 1/2 1/2
23456
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150