STEP 5: FIGURE 5
10
• Insert two GUIDE RODS (33) through the
SHROUD SUPPORT BRACKET (16) and into
the TOWER BASE (10) as shown on FIGURE
5.
• Slide two 3/4 X 2” WEIGHT STACK CUSH-
IONS (32) down over the GUIDE RODS (33)
as shown in FIGURE 5.
• Using EXTREME CARE slide all twenty
WEIGHT PLATES (34) down over the GUIDE
RODS (33) on to the WEIGHT STACK CUSH-
IONS (32). Make sure that the WEIGHT
PLATES (34) are all facing as shown.
• Slide the HEAD PLATE ASSEMBL Y (36) down
over the GUIDE RODS (33) onto the weight
stack as shown in FIGURE 5.
• Slide two 13/16” SHAFT COLLARS (39)
over the GUIDE RODS (33) as shown in
FIGURE 5.
• (NOTE: Lubricate GUIDE RODS (33) with
silicon or teflon spray available at most
hardware stores.)
• Apply WEIGHT STACK LABELS (74) to
WEIGHT PLATES (34) and HEAD PLATE (36)
as shown in FIGURE 5. Begin with number one
at the HEAD PLATE (36) with larger numbers
in consecutive order towards bottom of weight
stack.
39
32
16
34
36
33
10
74
• Repeat STEP 5 to assemble two more weight
stacks to the TOWER BASE (10).