26

STEP 29:

FIGURE 29
69
73
67
66
46 26
65
5
26
3/8 X 67mm 55
8
• Route the MULTI PRESS CABLE (73) through the MULTI PRESS FRAME (8) and assemble one 4-1/2” PULLEY (26) to the
FRAME (8) using four RH CAPS (69), one 3/8 X 67mm BOLT (55), one 3/8 X 61mm BOLT (54), four 3/8” SAE WASHERS (66), four
3/8” RH WASHERS (67), two 3/8 X 1/2” FLANGE SPACERS (46) and two 3/8” LOW HEIGHT LOCK NUTS (65) as shown in FIG-
URE 29.
• Route the MULTI PRESS CABLE (73) through the MULTI PRESS FRAME (8) and PIVOT ARM (5) and assemble one 4-1/2”
PULLEY (26) to the PIVOT ARM (5) using one BLACK RH CAP (68), one RH CAP (69), one 3/8 X 70mm BOL T (56), two 3/8” SAE
WASHERS (66), two 3/8” RH WASHERS (67), one 2-7/8” X 2-1/4” CABLE CLIP (28), two 3/8 X 1/2” FLANGE SP ACERS (46) and one
3/8” LOW HEIGHT LOCK NUT (65) as shown in FIGURE 29.
3/8 X 70mm 56
28
4
69
68 BLACK
54 3/8 X 61mm