800 | Lifescan Basic Blood Glucose Monitoring System guide

MESSAGE

PROBLEM

WHAT TO DO

3. The test strip was removed before the test was completed.

4. There was not enough blood on the test strip.

5. The meter was used in very bright light.

3. Repeat the test with a new test strip.

4. Repeat the test with a new test strip.

5. Move the meter away from the light source. Repeat the test with a new test strip.

6. The check strip procedure	6. Repeat the check
was incorrect.	strip test.
7. The meter may not be	7. Call LifeScan
operating correctly.	Customer Services at
	1 800 227-8862.

66

Image 74

Lifescan Basic Blood Glucose Monitoring System manual 800

Contents

Basic Page Page Important The OneTouch Basic System kit contains Table of Contents Testing Your Blood Page Page Introduction Precautions Limitations Infection Control Getting Started OneTouch Basic Blood Glucose Complete OneTouch Basic Blood Glucose Monitoring System OneTouch Basic Blood Glucose Meter Basic Meter Test Strip HOLDER. The test strip OneTouch Basic, Profile, OneTouch II Test Strips Test Strip Important Test Strip Information OneTouch Normal Control Solution To practice the test procedure, Code the OneTouch Basic Meter in these three easy steps Before TestingSetting Meter Code Press the On/Off Button Match the Code Numbers Checking the System Code the Meter Checking with the Check Strip How to do a check strip test Page Example Checking with Control Solution Spot with the tip of the vial Do a control solution testControl solution test tips Important Control Solution Test Information Spot facing up How to do a control solution testPress On/Off Button. Insert Test Strip Test strip in all Apply Control Solution Control range You are ready to test your blood Control solution results Meter malfunction Extremes in testing temperatures Testing Your Blood Abbreviated Test Procedure Detailed Test Procedure Test Getting a Drop of Blood While the lancet is in the OneTouch Penlet Plus Sampler, twist off the pro Adjust the puncture depth setting Cock the OneTouch Penlet Plus Sampler Wash Your Hands Lance Your Finger Your blood glucose test Clockwise Required blood volume. Proceed withRemove the Lancet Always use caution when removing How to Test Your Blood Replace the vial Cap immediately Do not touch Test spot on Remove a testStrip from the vial Test strip. The test Apply Blood Sample Drop Be sure that youTouch only the tip Blood to the test Results will appear without time Date. See Accurate Results SecondsAfter the result is displayed Special Messages Checking the Amount of Blood on the Test Strip Strip from If the following messageRemove the test Back Comparing Meter and Laboratory Results Take your meter with you to the lab Comparing the results ExamplePage Using the Meter Memory Entering the Memory Mode Recalling Test Results Setting Meter Options Entering and Using Set-Up Mode If you want to change an option setting, use the C button Clock option is set to and when it is set to Clock Time and Date Setting the Time Setting the Date Beep Prompts Or press the M button to move to the next option Language Time Format Date Format Unit of Measure Decimal Separator Exiting the Set-Up Mode Itself off after two minutes of no activity Solving Problems Test Procedure Messages Solution test Button 108 mg/dL Mmol/L 100 mg/dL 80 mg/dL Hi mg/dL 58 mg/dLAlternating with 58 mg/dL Alternating with Error Messages When this symbol is flashing, the batteries are too low Battry Meter was used in very bright light Correctly New test strip Test strip moved duringTest New test strip Test strip was not inserted 800 Error3 retest Not enough blood retest Your meter on, your meter’s If appearing when you turnWas turned on Test area may be dirty Repeat the test with a Last test failed after the countdown started Strip vial to operate Message when the meterMeter requires a test Has not yet been coded Keep the test strip holder and test area clean see Taking Care Your Meter Appears on the display Cleaning the MeterDoing a Daily Check Remove the Test Strip Holder from the Meter Clean the Test Strip Holder Wash only the test strip holder with May also be used. Do not apply full Careful not to scratch the test area Replace the Test Strip Holder Replacing the Batteries Batteries should last about To replace the batteries Against a hard surface Remove the battery compartmentDoor References Remove the batteries and reinsert them as illustrated Alkaline batteries SpecificationsDimensions 4.3 2.6 Weight 4.1 ounces with batteries 15-35C Three-Year Warranty Guarantee WarrantyDay Money-Back Guarantee Page Index OneTouch Penlet Plus Adjustable Blood Page Page Page USA