BEFORE TESTING
Step 3: Code the Meter. |
| |
While the meter |
|
|
is on and after the |
|
|
word insert is |
|
|
displayed, press |
|
|
and release the C |
|
|
button; the code | M | C |
number will |
|
|
appear. Continue |
|
|
pressing the C |
|
|
button until the |
|
|
number on the |
|
|
display matches |
|
|
the code number on the test strip vial. The code number is now set for the test strips you are using. The meter will remember this code number until
you change it. You are now ready to do a test.
Checking the System
There are two ways to make sure your ONE TOUCH® Profile® System is working properly. The check strip is used to check that the meter is operating properly. ONE TOUCH® Control Solution is used to check that the meter and the test strips are work- ing together as a system and that you are performing the test procedure cor- rectly. It is very important that you do these simple checks routinely to make sure you get accurate results.
14
