Press forward on the base of the test strip holder to be sure it is properly in place.
installed. When the batteries need to be replaced, use two AAA, 1.5 volt, alkaline batteries.
M | C |
You are now ready to do a check strip test. If the check strip will not slide into the test strip holder, repeat Step 4.
Replacing the Batteries
The ONE TOUCH® Profile® Meter comes with batteries already
The batteries should last about one year when testing up to four times a day. When the battery symbol appears on the meter display, the batteries are getting low. The meter will still provide accurate test results with low batteries, but you should replace them as soon as possible.
METER CARE
89
