Lifescan blood glucose monitoring system manual Apply

MESSAGE		APPEARS WHEN
apply		The meter is ready to receive a blood or control solution sample. If
sample		performing a check strip test, this is your signal to remove the check strip
		from the meter.
45. . .	0. . . .	The meter is counting down from 45 seconds to 0.
106 mg/dl		A blood test has been completed. This indicates a blood glucose result
(Example)		when the meter is set for mg/dL, the unit of measure used in the
8:01am6-01-95
		United States.

5.9mmol/l A blood test has been completed. This indicates a blood glucose result

(Example)	when the meter is set for mmol/L, the unit of measure used in Canada
8:01am 6-01-95and parts of Europe.

5.6mmol/l A control solution test has been completed. (If you have just performed

(Example)	a blood glucose test, this means that the blood sample was too small and
contrl
	the meter read it as control solution. Repeat the test with a new test strip and
7:52am 6-01-95	larger drop of blood.)
insert	You are performing a check strip test. Turn the check strip over and insert
side 2	Side 2.

MESSAGES

75