Step 3: Clean the Test Area.
CAUTION: Do not get water inside the meter.
The following cleaning agents will damage the meter.
Do not use:
•Alcohol
•Cleansers with ammonia or phenol
•Windex® or other glass cleaners
•Abrasive cleaners
(Windex is a registered trademark of the Drackett Products Company.)
Check the clear, protective coating over the test area to make sure it is not scratched or damaged.
Rub the test area with a cotton swab or soft cloth dampened with water to remove all blood, dirt, or lint from the test area. If necessary, a mild liquid dishwashing detergent mixed with water may also be used. Do not apply
M | C |
Dry the test area with a soft, dry tissue or cloth. Remove any lint.
METER CARE
87
