Lifescan Diabetes Monitoring System manual ONE Touch Basic Plus Blood Glucose Meter, Button

ONE TOUCH™ BASIC™ Plus

Blood Glucose Meter

Study this diagram and become familiar with all the parts of your ONE TOUCH™ BASIC™ Plus Meter.

M BUTTON

The ONE TOUCH BASIC Plus Meter automatically stores your test results. Use the M button to recall the information stored in your meter’s memory and to review your meter’s option settings.

DATA PORT
Allows you to transfer the	M
information stored in the meter’s
memory to a computer to view,

analyze, and print.

TEST STRIP HOLDER

The test strip holder holds a ONE TOUCH™ Test Strip in place when you perform a blood glucose or control solution test. It must be

5

removed to clean the meter.

BATTERY COMPARTMENT (on back) Holds two AAA batteries. The batteries are already installed in your meter.

DISPLAY

The large, easy-to-read display is where you read the simple messages that guide you through testing. Your test results are displayed here.

ON/OFF BUTTON

This button turns the meter on and off.

C

C BUTTON

Use the C button to change the option settings on the ONE TOUCH BASIC Plus Meter.

TEST AREA

The test area is located under the test strip holder. There is a clear, protective coating over the test area that must be kept clean and undamaged for accurate results.